Product Description
Head type (Alternate names) |
Countersunk (Flat) |
Size | 4 BA (British Association) |
Shank diameter nominal | 0.142" (3.6mm) |
Pitch | 38.5 tpi (0.66mm) |
Length (measured from top of head) |
3/4" |
Drive | Slot |
Material | Steel |
Finish | Zinc plated |
Head diameter max. | 0.252"" |
Head angle | 90 ± 2 degrees |
Standard | BS 57 : 1951 |
Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
Product Videos
Product Reviews
1 Review Hide Reviews Show Reviews
-
Great Screws
These little guys have been a blessing to find, and they are exactly what I was after. Would have preferred bright mild steel, but the zinc blasted right off without a drama so all good!