Product Description
Head | Countersunk |
Alternate name | Flat head |
Size | 3 Gauge |
Shank diameter | 0.099" (2.51mm) |
Head Diameter Maximum | 0.199" (5.06mm) |
Length from top of head | 5/8" |
Material | Brass |
Finish | Natural |
Drive | Slot |
Product Videos
Product Reviews
3 Reviews Hide Reviews Show Reviews
-
Brass hinges
I have purchased these before for installation of brass hinges. Excellent screws, just make sure you use a steel identical screw first as a lot of timber is too hard for brass screws
-
5/8 brass countersink screw
excellent screws, I use this in conjuction with very expensive brass hinges. I would recommend firstly after pre drilling, to use a steel screw, then remove, then use the brass screw.
-
Brass screws
These were just what I am after