Product Description
Head type (Alternate name) |
Countersunk (Flat) |
Size | 1/4 UNC |
Shank diameter, nominal | 1/4" |
Pitch | 20 tpi |
Length (Measured from the top of the head) |
2 1/2" |
Drive | Slot |
Material | Steel |
Finish | Zinc CR+3 |
Head diameter, max. | 0.507" |
Head angle | 80-82 degrees |
Standard | ANSI/ASME B18.6.3 |
- Dimensions: Our stock is sourced from various suppliers; therefore, differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering